Most of the foods that are eaten in Nigeria are made from processed grains. By processing, we mean grains that are ground into powder or paste. Several years ago, these grains were ground using grinding stones or pounded with a pestle in a mortar.
Today, we don’t need to do that anymore because technology has gifted us grain grinding machines. There are several kinds of grain grinding machines on the market. In this post, we will look at them as well as their prices and capacities.
Prices of Grain Grinding Machines in Nigeria
Nigerians consume several kinds of grains in different parts of the country. As such, there is a need for grain grinding machines of different capacities. These machines can be small for processing grains for a small family or large for commercial purposes.
We took time to check the different machines on the market, offline and online. After our survey, we came up with a list of popular products along with their prices. Check the list below:
Manual Corn And Grain Grinder – N11,000 – N16,000
Details
- Rugged, high-quality cast-iron construction.
- Tin-plated steel (no aluminum parts).
- Durable handle and hopper.
- No internal plastic parts that wear out or break.
- Makes the healthiest and freshest grain products in minutes
- Easy and quick clamp-on installation
- Self-cleaning (simply dust off after use).
Corona Manual Food/Grain Grinder – N15,000 – N20,000
Details
- Product dimension: 12 x 6 x 17 inches
- Handle dimension: 10 inches
- Grinding rate: 1 round per minute
- Construction: Cast iron
- Highly durable.
- Grinds corn, spices, peanuts, and pepper.
- Five-year warranty.
- Self-cleaning (simply dust off after use).
Grinding Mill Petrol Engine – Gx160 – 5.5hp – N74,000 – N80,000
Details
- 100 percent copper engine
- 17 inches mill pan
- Ability to grind Maize, Milex, Tiger nut, Beans, etc
- Ability to move about or station
- Anti-rot iron mill
- Bore x Stroke: 68 * 45 mm
- Sharp blade/mill
- Consumes low fuel
- Cylinders: 1, Cycles 4,
- Displacement: 163cc,
- Easy to couple
- Engine Oil Capacity: 0.7L
- Fuel Tank Capacity: 3.6L
- Fuel: Petrol
- Max: 5.5HP/RPM 6.5/3600
- Max Nm/RPM: 11/2600
- Shaft: Horizontal
- Starting System: Recoil/Key
- Valve: OHV
Grinding Mill With Gx200 Petrol Engine (6.5hp) – N75,000 – N120,000
Details
- 100 percent copper engine
- 17 inches mill pan
- Ability to grind Maize, Millex, Tiger nut, Beans, etc
- Ability to move about or station
- Anti-rot iron mill
- Bore x Stroke: 68 X 54 mm
- Sharp blade/mill
- Consumes low fuel
- Displacement: 196 cm3
- Easy to couple
- Engine Type: Air-cooled 4-stroke OHV
- Net Power Output: 6.5 HP (4.1 kW) @ 3,600 rpm
- Net Torque: 9.1 lb-ft (12.4 Nm) @ 2,500 rpm
Grinding Mill With Gx 390 Petrol Engine And Big Mill Pan (13hp) – N158,000 – N179,000
Details
- 100 percent copper engine
- Ability to grind dry Cassava, Yam, Maize, Millet, Tiger nut, Beans, etc
- Ability to move about or station
- Air cleaner: Dual element
- Anti-rot iron mill
- Big mill pan
- Sharp blade/mill
- Consumes low fuel
- Easy to couple
- Fuel Tank Capacity: 6.4 U.S. qts (6.1 liters)
- Fuel: Unleaded 86 octane or higher
- Governor System: Centrifugal Mass Type
- Oil Alert
- Oil Capacity: 1.16 US QT (1.1 L)
Tigmax Grinding Mill With Tigmax Petrol Engine – Gx200 – N73,000 – N90,000
Details
- Engine Type- Air-cooled 4-stroke OHV
- Bore x Stroke- 68 X 45 mm
- Displacement- 163 cm3
- Net Power Output*- 6.5 HP (3.6 kW) @ 3,600 rpm
- Net Torque- 7.6 lb-ft (10.3 Nm) @ 2,500 rpm
- PTO Shaft Rotation- Counterclockwise (from PTO shaft side)
- Compression Ratio- 9.0:1
- Lamp/Charge coil options- 25W, 50W / 1A, 3A, 7A
- Carburetor- Butterfly
- Ignition System- Transistorized magneto
- Starting System- Recoil Starter
- Lubrication System- Splash
- Governor System- Centrifugal Mechanical
- Air cleaner-Dual Element
- Oil Capacity – 0.61 US qt. (0.58 L)
- Fuel Tank Capacity – 3.3 U.S. qts (3.1 liters)
- Fuel – Unleaded 86 octane or higher
- Dry Weight – 33 lbs. (15.1 kg)
Note that there may be variations in these sizes depending on your location and the vendor that you patronize.
